Sign in or register

My Asc365

My shopping cart

contact us

   
Engraving> Engraver Accessories>
130010:60W Laser Tube
Unit:
set
Price:
C $419
Weight:
19.00kg
QTY:
     

Similar products

130019:2030Honeycomb Table for CO2 Laser Engraver Cutting

130017:18MM 50 Focus Len

130016:20MM Focus Len

130012:200x300 XY Stage Table Bed Plotting for K40 CO2 Laser Cutting Engraving Machine

130008:CO2 Laser Machine Power Supply 50W110V

60W laser Tube
Brand New 60W CO2 Laser Engraving Machine Laser Tube
Power output(W):60
Wavelength:10600nm
Length(mm):1200
Cooling System: Water Cooling.
Triggering voltage(KV):22
Operating voltage(KV):16
Operating current(mA):0-20
Outer diameter(mm):60
Power stability: ±5%
Water Cool
Package including: 1x 60W laser tube
You can't leave cooling water in laser tube after power off, it will freeze at Cold areas.
Optimum working water temperature is 15-35 degrees.
working lifetime up to 3000-4500 hours (According to the water temperature, continuous workload, the use of laser intensity and other aspects to determine)
The Laser tube after generally work 3-4 hours should to pause for about 30 minutes.
Low power can extend the life of the tube.
Installation Requirement
Make sure to follow the operation instruction of model as shown in the illustration. The dedicated power should be equipped. The positive pole of laser tube is in high voltage (the ignition voltage is 22kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage.
Can be used for 60W laser machine
Recommends Accessories :
130083: Laser tube Holder
130002: Industrial Water Chiller CW5000
130114: Industrial Water Chiller CW3000
130022: 65W water pump
130021: 20W water pump
130056: 45W water pump
Plastics & Rubber
无标题文档

About Us Product Service Shipping Payment Privacy refund Warranty

Copyright ASC365.com All Rights Reserved